TUF 5240 Electrical Disconnect Pliers
Click image to view full sizeItem-Name:
Specification:
TUF 5240 Electrical Disconnect Pliers
Specification:TUF 5240 Electrical Disconnect Pliers
More-Details:
More Products
TUF 5201 Professional Automotive Meter
* Full length：200x95x52mm* 3-3/4 digit, 3999 counts, bar graph display* RPM：600-4000, 6000-12000±2%* ms pulse width：0.1ms to 10.0ms±2%* Dwell angle：4, 5, 6, 8 cylinders±2%* Duty cycle：0-90% > 100μs, < 100ms±2%* DC volts(auto)：0-400mV/4/40/400/1000V±0.5%* AC volts(auto)：0-400mV/4/40/400/750V±1.2%* DC current：0-400mA/20A±1.0%* AC current：0-400mA/20A±1.5%* Resistance(auto)：0-400/4k/40k/400k/4M/40MΩ±1.0%* Capacitance(auto)：0-4nF/40/400/4μF /40μF±2.0%* Frequency (auto)：0-100Hz/1k/10k/100k/400kHz±0.1%* Temperature：-50 to 1100°C, -50 to 2000°F±1.0%* Resolution: 100μV, 100μA, 0.1Ω, 0.01Hz, 1°C/F* Diode test* Continuity test* Data hold* ZERO relative* Max/min hold* ±trigger* 20A fused* Auto power off* Safety test leads* Overload protection on all ranges
TUF 5202 Automotive Meter
* Full length：165x78x48mm* 3200 counts, bar graph display* RPM：600-3200, 6000-12000±2%* Dwell angle：4, 5, 6, 8 cylinders±2%* Duty cycle：0-90% > 100μs, < 100ms±2%* DC volts(auto)：0-320mV/ 3.2/ 32/ 320/ 600V±1.2%* AC volts(auto)：0-3.2V/32/ 320/ 600±2.0%* DC current：0-320μA/ 3.2/ 32/ 320mA/ 10A±2%* AC current：0-320μA/ 3.2/ 32/ 320mA/ 10A±2.5%* Resistance(auto)：0-320/ 3.2k/ 32k/ 320k/ 3.2M/30MΩ±1.5%* Frequency：10-320 HZ/ 3200 HZ/ 32kHZ±1.0%* Temperature：-30 to 750°C, -22 to 1400°F±2%* Resolution：100μV, 0.1μA, 0.1Ω, 0.1Hz, 1°C/ F* Diode test* Continuity test* Data hold* 10A fused* Auto power off* Safety test leads* Supplied probe: type K beaded wire thermocouple each input* Overload protection on all ranges* Safety input jacks
TUF 5203 AC/DC Current Clamp
* Full length：173mm* Use two hell-effect sensors* For use with any multimeter with 200mv or/and 2v ranges for direct readout. Input impedance of at least 1mΩ* A LED lights up when the clamp is under power * Zero adjustment knob to compensate the hysteresis effect in DC measurements* Transformer ratio：1000:1 * Output：1mV/A* Current range：0-600A* Accuracy：DCA±2.0%+2A ACA±3.0%+2A (50-400Hz)* Jaw opening capability：30mm conductor* Please use this tool with 5201 or 5202
TUF 5216 AC/DC Digital Clamp Meter(600A)
TUF 5230 Infrared Thermometer
TUF 5228 Digital LCD Circuit Tester(DC:3~48V)
1. Operating range：3~48 volts DC to work on most vehicle electrical systems.2. Detects power, voltage, ground, and circuit integrity3. Computer safe with backlight LCD display for accurate voltage readout4. LED glows red for power and green for ground5. Cable length：11'
TUF 5235 Multi-Functional Auto Circuit Tester(DC:6~24 volt)
IntroductionTUF 5235 is an equipment used to test the automotive electrical system within 6~24 volts. In order to save the testing hours for the automotive electrical system, TUF 5235 is designed to testing the system without re-connection between the vehicle battery and the testing components, and it contains the following functions： * Determine the polarity and circuit circumstance(short/ open).* Activating the components with positive or negative current without jumper wire* Testing the voltage and continuity of the circuit.* IlluminationEventually, for the testing and safety purpose, TUF5235 contains short- circuit protection, which can also check the ground connection without voltage drop tests. The short-circuit protection system contains therecoverable fuse, and so the technician will not waste the fuses during the testing. The extension cable with TUF5235 is long enough for a technician to test the whole system for the vehicle, therefore, the technician do not have to search for ground connection constantly.IlluminationSince some of the testing circuit will be shadowed during the testing, TUF5235 provides the illumination for you convenience. The illumination will automatically turned on as the technician hook up TUF5235 with vehicle battery.
TUF 5215 LED Connector Testing Set
* Contents：1pc LED testing light, 2pcs testing probes red & black* The probe is made from stainless steel for easier testing* The LED shows yellow light when connecting with positive pole and shows red light for negative pole
